Installation The Cribs That Convert To Beds
– Parts and tools; the only tools required to dismantle and convert are a Phillips screwdriver, a rubber mallet and an Allen key. To convert the crib into bed (that’s double bed), you need to buy a set of universal binaries designed for this purpose. Pail offers these tracks for purchase on the company’s website.
Cot; To Installation the cribs that convert to beds, first remove the mattress and bed linen. Carefully tip the crib on one side, with the side to fall upwards. Use an Allen wrench to loosen the two golden screws on each side of the crib. Slide the side of the free fall of the crib frame and set it aside, then return the crib upright. Loosen the fixing screws of the bed in place, and lower the stand to the bottom of the cradle and tighten the bolts. If you want to install a straight track, use the same furrows previously occupied by the drop side.
Double bed; When you Installation the cribs that convert to beds (that’s double bed), start by removing the driver’s side or drop straight when installed. Remove the bolts that secure the mattress support to the frame, then pull the free support and set it aside. Remove all bolts and screws that secure the front and on the sides of the frame to the head, then set these pieces aside. Combine the universal binaries at the base of the head, and then install a box spring in the bed frame. Place the mattress on the double bed springs and cover with bedding.